The DOE/ORNL Heat Pump Design Model is a research tool for use in the steady-state design analysis of air-to-air-heat pumps and air conditioners.

The WEB version has an HTML-based input interface which generates the required input text file, executes the FORTRAN application, and summarizes the results on your Web browser.

As this is a hardware-based model, the user can specify the heat exchangers and air flows and select a compressor. The flow control devices may be specified or sized by the program based on desired conditions leaving the heat exchangers. The program analyzes steady-state performance for indoor and outdoor air conditions provided by the user. An example case is provided.

The Web version also has parametric analysis capability. A variety of performance trends can be viewed for a range of operating or design variables.

NEW!  Mark VII Model Improvements

Capabilities of Mark VI Web Model

Earlier Web Interface and Feature Improvements

Please send comments/suggestions on the Web version to Keith Rice at Oak Ridge National Laboratory.

For more information on this and related ORNL heat pump models:

• Description of DOE/ORNL Model in DOE Building Equipment Software Directory

• General Presentation on Mark V DOE/ORNL Model Capabilities

• Presentation on Mark VI DOE/ORNL Model Improvements

• NEW!  Presentation on the Mark VII DOE/ORNL Model Improvements

• Related Reports/Papers Available on the Web

• Mark VI_DH Version of Web Model

• Mark VI Version of Web Model

• Mark V Version of Web Model

This program was developed by Oak Ridge National Laboratory (ORNL) under sponsorship of the Department of Energy (DOE) Office of Building Equipment.

Since August 21, 1998,
The Web model has been run 199579 times.


The Web version was last revised on April 18, 2005.
This page was last updated June 17, 2009.

Note to users of Internet Explorer, versions 3x