Organizations

Forum 1: Looking for project partner sensors and controls
Ulrich Bonne (ulrich.bonne@honeywell.com) on Monday, February 3, 2003 at 09:37:22
Company: Honeywell International, as represented by two entities: 1) Sensing and Control (formerly Micro Switch Division), and 2) Honeywell Laboratories
Capabilities: R&D on sensors and controls >Productization, packaging, networking and manufacture of sensors
URL: www.honeywell.com
Looking_for: Partners who either: 1) Want to lab or field test NeSSI-II assemblies, who would thus design an installation, install a NeSSI assembly provided by Honeywell, monitor and evaluate the data from this test and validate estimated process savings attributed to the deployment of NeSSI assemblies and/or 2) Want to develop a modular sensor for eventual mating to a std. SP-76 NeSSI footprint and can bring to the partnership their own 50% cost-share. NeSSI assembly is described in a White Paper to DOE. It is a modular, plug-and-play assembly of components to sample and sense process streams. NeSSI = New Sampling/Sensing Initiative, which originated at CPAC (Center for Process Analytical Chemistry).

Ronald Michaels (rbm1024@netscape.net) on Monday, February 3, 2003 at 17:45:23
Company: Industrial Analytics Corporation 10233 Chapman Highway Seymour, TN 37865
Capabilities: x-ray radiography of very low density materials, numerical analysis of images. I typically work in the 15kV range Optical analysis of EPS foam.
URL: foamcity.com
Looking_for: looking for application area partner and industrial partners in low density materials or composites. I am currently working in the Lost Foam Casting area.

Glenn O. Allgood (allgoodgo@ornl.gov) on Monday, February 3, 2003 at 13:20:20
Company: Oak Ridge National Laboratory Phone (865) 574-5673 Fax (865) 576-0003
Capabilities: Have been working over the past 7-8 years on the idea of constructing sensors that exhibit intelligent anticipatory behavior. Would have a strong play in prognostics and health assessment, self organizing nets, etc. Looking_for: Looking for interested parties to team with ORNL in developing sensor agents which is based on the biological paradigm of anticipatory control. Looking for wireless technologies and computational capabilities.

Karl Stephan (kdstephan@swt.edu) on Friday, April 11, 2003 at 14:35:28
Company: Southwest Texas State University Dept. of Technology, San Marcos, TX 78666, ph. 512-245-2137
Capabilities: Developing a microwave-based radiometric sensor for measurement of temperature remotely where IR sensors do not work due to particulates, etc.
Looking_for: Industrial partner to develop prototype and marketable units.

Forum 2: Looking for cost-share partner sensors and controls
xin wu (xwu@eng.wayne.edu) on Friday, February 7, 2003 at 07:06:49
Company: Wayne State University Institute for Manufacturing Research
Capabilities: Research on material processing and manufacturing Advanced process monitoring and control Sensor development
Looking_for: Industry partners in the business of Raw material processing (e.g. steel, aluminum industries) Industrial control End-producers (auto industry and suppliers) Sensor/actuator producers

Douglas H. Lenz (falconeer@techsolutionswny.com) on Thursday, March 20, 2003 at 16:50:30
Company: FALCONEER Technologies, LLC 5820 Main Street, Suite 102 Williamsville, NY 14221 716 204-0273 Phone 716 632-7495 Fax
Capabilities: The goal of this collaboration is to develop and commercialize an innovative real-time diagnostic rule compiler for automatically creating process sensor validation and fault analysis diagnostic strategies. Our capabilities include artificial-intelligence based and expert-systems based programming, applications R&D, sales & marketing, software customization & service.
URL: www.falconeertech.com
Looking_for: We are looking for a cost-sharing end-user company to beta test the innovative sensor validation & fault analysis technology on commercial manufacturing plants with process control systems and associated plant data. The end-user partner(s) could be from one or more of the process industries such as chemical, petroleum, paper, power, glass, pharmaceutical, aluminum and/or steel.

Forum 3: Looking for project partner industrial wireless sensors
Jeff Reed (reedjh@vt.edu) on Sunday, February 23, 2003 at 16:01:48
Company: Mobile and Portable Radio Research Group (MPRG) Virginia Tech 432 Durham Hall Blacksburg, VA 24061 reedjh@vt.edu 540 231 2972
Capabilities: Our strenghts are in providing the communications capability to the sensor network.
URL: http://www.mprg.org
Looking_for: We would benefit from a company that can provide sensors and that can help with the cost sharing arrangements.

Forum 4: Looking for cost-share partner industrial wireless sensors
No entries

Forum 5: Looking for project partner in both technology areas
Steven Chen (schen@3eti.com) on Friday, January 24, 2003 at 10:20:19
Company: 3e Technologies International, Inc.
Capabilities: Strong government business development
wireless LAN design
802.11a/b/g card, access point, router with high level of security (VPN, AES/3DES)
IEEE1451 smart sensor interface
Network protocol (802.11x, 802.3, Bluetooth, HPNA, USB, IrDA, power line)
middle ware for data fusing
web-enabled knowledge management
URL: www.3eti.com
Looking_for: partners with MEMS, SoC design

Darold Wobschall (designer@eesensors.com) on Friday, February 14, 2003 at 13:25:27
Company: Esensors Inc Amherst NY 14226 716-837-8719
Capabilities: We have developed a series of sensors with a direct Internet addresses (websensors). Examples are HVAC/ power monitoring and an IEEE 1451 NCAP.
URL: eesensors.com
Looking_for: We would like to provide the sensor signal conditioning and network interfaces to a system integrator, especially involving electrical energy management.

Barry Lowther (blowther@cytecsys.com) on Wednesday, February 26, 2003 at 11:24:26
Company: Cytec Corporation 736 S. President Street Jackson, MS 39110 Ph: 601-968-5172 Fax: 601-968-5175
Capabilities: Government business development, wireless application and network development related to AIT/ADC technologies, active and passive RFID system development, wireless interchangeable sensor modules and control system for industrial and environmental applications. Self-calibrating chemical sensors and biosensors, micro/nano fluidic chemical sensors.
URL: www.cytecsys.com
Looking_for: The Cytec team is searching for a project partner in both Sensor and Controls, and Industrial Wireless Sensors that can assist in sensor development. We are also looking for an end-user company to beta test innovative industrial wireless sensors. This company should be one of the process industries such as chemical, metal casting, forest products, energy, glass, aluminum, petroleum, steel, or mining.

Ken Stonecipher (ksktone@mchsi.com) on Tuesday, July 22, 2003 at 16:29:41
Company: Caterpillar Inc. 309-578-2802
Capabilities: Advanced sensor technology design engineering
Looking_for: Innovative products and partners

Jim Overson (info@laceyharmer.com) on Monday, October 27, 2003 at 23:16:39
Company: Lacey-Harmer Co. 4320 NW St. Helens Rd. Portland, OR 97210 800.367.9992
Capabilities: Supplier of industrial monitoring and control systems.
Looking_for: Rugged, long range wireless devices immune to RF and environmental interference.

Forum 6: Looking for cost-share partner in both technology areas
John W. Telford (wtelford@lanl.gov) on Wednesday, January 15, 2003 at 12:26:16
Company: Los Alamos National Laboratory
phone 505 667 3437
Mail Stop E 539
Los Alamos, NM 87545
Capabilities: We are the process control and instrumentation team. We research and develop new sensor techniques. There are approximately 15 engineers/technicians available with full shop capabilities. We are DOE related.
Looking_for: A company who wishes to apply for grants to develop sensor technology.

Steven Chen (schen@3eti.com) on Friday, January 24, 2003 at 10:22:23
Company: 3e Technologies International, Inc.
Capabilities: Strong government business development wireless LAN design 802.11a/b/g card, access point, router with high level of security (VPN, AES/3DES) IEEE1451 smart sensor interface Network protocol (802.11x, 802.3, Bluetooth, HPNA, USB, IrDA, power line) middle ware for data fusing web-enabled knowledge management
URL: www.3eti.com
Looking_for: companies with channels and R&D funding

Barry Lowther (blowther@cytecsys.com) on Wednesday, February 26, 2003 at 11:26:41
Company: Cytec Corporation 736 S. President Street Jackson, MS 39201 Ph: 601-968-5172 Fax: 601-968-5175
Capabilities: Government business development, wireless application and network development, application development related to AIT/ADC technologies, active and passive RFID system development, wireless interchangeable sensor modules and control system for industrial and environmental applications.
URL: www.cytecsys.com
Looking_for: The Cytec team is searching for a cost-sharing partner for further development on enhancement of wireless sensor based network and beta-site testing for the wireless sensor network.

Robert Hogan (hogan@3eti.com) on Wednesday, March 26, 2003 at 16:12:12
Company: 3e Technologies International POC: Robert Hogan VP Government Operations 301-944-1279
Capabilities: 3eTI provides wireless devices, applications and infrastructures. We are in the process of providing and installing wireless sensors and lans on US Navy ships and bases.
URL: www.3eti.com
Looking_for: A partner or partners to provide matching funds and complementary technology where required.