Modeling Two- and Three- Dimensional heat Transfer Through Composite Wall and Roof Assemblies in Transient Energy Simulation Programs (1145-TRP)
Corner: 2x4 wood (3.5 wood stud 16oc)
Window Header: 2x4 wood; 3.5 wood stud 16oc
Foundation: 3.5 wood stud 16oc
ICF wall: Polysteel 03 with finish
Steel stud wall: 3.5 stud 16GA 24oc 15 flangs
2x4 steel stud wall(window header)
Wall/floor: 2x4 steel stud wall R-11 insulation
Wall/roof: 2x4 steel stud wall with R-11 insulation
-2x4 steel stud wall + 1" EPS + Brick (clear wall)
-2x6 steel stud wall + R-19 insulation (clear wall)
-2x6 steel stud wall + R-19 insulation + 1" EPS + stucco
-2x6 steel stud wall + R-19 insulation + 1" EPS + brick
Two-core concrete blocks + empty cores + stucco
Two-core concrete blocks + insulated cores + stucco
PART I |
Executive Summary |
Acknowledgements |
Figures |
Tables |
Introduction |
Identification of Common Details |
Methodology |
Results |
Validation |
Equivalent Wall Model Methodology |
Conclusions |
Nomenclature |
References |
Appendix |
PART II - RESULTS |
Roofs+Walls Home
© Oak Ridge National Labs and Polish Academy of Sciences
Updated July 10, 2001