Publications

Relevant Publications:

• S. A. David, S. S. Babu, and J. M. Vitek, “Overview – Welding: Solidification and Microstructure,” JOM-J MIN MET MAT, 2003, 55, 14-20.
• M. L. Santella, et al. 2003. "In-Situ Characterization of Austenite to Martensite Decomposition in 9Cr-1Mo-V Steel Welds," Proc. Austenite Formation & Decomposition Symposium, Chicago, IL USA, TMS, TMS, Chicago, IL USA, 11/09/2003-11/12/2003.
• S.A. David and Z. Feng, “Friction Stir Welding of Advanced Materials: Challenges,” IIW Materials Conference, Graz, Austria, IIW, 11/19/2004 – 11/20/2004.
• Z. Feng, X-L. Wang, S.A. David, and P.S. Sklad, “Modeling of Residual Stresses and Property Distributions in Friction Stir Welds of Aluminum Alloy 6061-T6,” 5th Intl Symp Friction Stir Welding, Metz, France, TWR, 9/14/2004-09/16/2004.
• O. M. Barabash, J. A. Horton, S. S. Babu, J. M. Vitek, S. A. David, J-W. Park, G. E. Ice, R. I. Barabash, “Evolution of Dislocation Structure in the HAZ of a Nickel-Based Single Crystal," J. Appl. Phys, 96, Issue I & 7, 3673-3679, 2004.
• Z. Feng, et al. 2004. "Prediction of Residual Stresses and Property Distributions in Friction Stir Welds of Aluminum Alloy 6061-T6," Proc. 5th Int'l Symposium of FSW, Metz, France, TWI, 09/14/2004-9/16/2004.
• M.L. Santella, T. Engstrom, D. Storjohann, T-Y. Pan, A.R. Krause, and F. A. Conle, “Effects of Friction Stir Processing on Mechanical Properties on the Cast Aluminum Alloys A319 and A356,” Scr. Materialia. 2004.
• D. Lee, M.L. Santella, G.M. Pharr, and I.M. Anderson, “Thermal Aging Effects on the Microstructure and Short-Term Oxidation Behavior of a Cast Ni3Al Alloy,” Intermetallics, 2004.
• D. Storjohann, O. M. Barabash, S. S. Babu, S. A. David, P. S. Sklad, and E. E. Bloom, “Fusion and Friction Stir Welding of Aluminum Metal Matrix Composites,” Metal. Mater. Trans. A. 36A, 3237 - 3247 (2005).
• G.M.D. Cantin, S. A. David, W. M. Thomas, E. Lara-Curzio, and S. S. Babu, "Friction Skew-Stir Welding of Lap Joints in 5083-0 Aluminium,” Sci. Technol. Weld. Joining, 10, (3), 268 - 280 (2005).
• M.L. Santella, T. Engstrom, D. Storjohann, and T-Y. Pan, “Effects of Friction Stir Processin on Mechanical Properties of the Cast Aluminum Alloys A356,” Society of Automotive Engineers Trans. 2005.
• O.M. Barabash, J.A. Horton, S.S. Babu, J.M. Vitek, S.A. David, G.E. Ice, and R.I. Barabash, “Multiscale Characterization of Deformation Mechanisms in the Weld Joint of a Nickel-based Superalloy,” Mater. Res.Soc. Symp. Proc. 882E, EE4.11.1 - EE4.11.6, 2005.
• W. Woo, H. Choo, D.W. Brown, Z. Feng, S.A. David, C.R. Hubbard, and M.A.M. Bourke, “De-convoluting the Influences of Heat and Plastic Deformation on Internal Strains Generated by Friction Stir Processing,” Appl. Phys. Lett. 86, 231092, 2005.