|
|
Grunloh |
Development and Fabrication of New Accelerator Grid Modules for Ion Sources in the 80 keV Neutral Beam Lines for DIII-D |
A-1 |
|||
|
|
Grunloh |
Fabrication of New Magnet Pole Shields for the 80keV Neutral Beam Lines for DIII-D |
A-2 |
|||
|
|
Hong |
Performance of a DIII-D Neutral Beam Ion Source with a New Accelerator Grid |
A-3 |
|||
|
|
Yip |
Water Cooling System Upgrade of DIII-D Facility for Long Pulse Operation |
A-4 |
|||
|
|
Chiu |
Beam Energy Deposition in the Magnet Pole Shield Region of the DIII-D Neutral Beam Injectors |
A-5 |
|||
|
|
Ebisawa |
Recent Activities of Negative Ion Based NBI System on JT-60U |
A-6 |
|||
|
|
Masiello |
Revision and Adaptation of the Reference Design HV Bushing to Singap Configuration |
A-7 |
|||
|
|
Froschle |
Progress in the Development of RF Driven Negative Ion Sources for ITER NBI |
A-8 |
|||
|
|
Bigi |
Circuit Analyses of the Filament Ion Source Power Supplies for the ITER Neutral Beam Test Facility |
A-9 |
|||
|
|
Zaccaria |
Design Integration of Singap Accelerator and RF Source in the ITER NB Injector |
A-10 |
|||
|
|
Toigo |
Comparative Analysis of two Electric Schemes for the Ion Source Power Supplies of the ITER Neutral Beam Test Bed |
A-11 |
|||
|
|
Jayakumar |
Finite Element Simulation of Defrosting from a Prototype Cooling Panel |
A-12 |
|||
|
|
Goulding |
The Improved JET ITER-Like Antenna High Power Prototype |
A-13 |
|||
|
|
Rasmussen |
ITER ICH System |
A-14 |
|||
|
|
Hosea |
RF Sources for the ITER Ion Cyclotron Heating and Current Drive System |
A-15 |
|||
|
(Withdrawn) |
A-16 |
|||||
|
|
Bombarda |
ICRH System for the Ignitor Experiment |
A-17 |
|||
|
|
Baity |
Failure of Feedthroughs Operated at a Low-Impedance Point on DIII-D |
A-18 |
|||
|
|
Singh |
VME Based Real Time Data Acquisition and Control System for SST-1 ICRH Transmission Line |
A-19 |
|||
|
|
Bibet |
ITER LHCD Plans and Design |
A-20 |
|||
|
|
(Withdrawn) |
A-21 |
||||
|
|
Koert |
New Microstrip Directional Coupler Design for Side of Waveguide in Lower Hybrid Current Drive System on Alcator C-Mod |
A-22 |
|||
|
|
Terry |
Commissioning of the Lower Hybrid Current Drive System on Alcator C-Mod |
A-23 |
|||
|
|
Ponce |
FPGA-Based Fault Processor for Gyrotron Control Programmed in LabView |
A-24 |
|||
|
|
Henderson |
The Design and Physics Performance of the ITER Upper Port ECH Front Steering Launcher |
A-25 |
|||
|
|
Sanchez |
A Frictionless Steering Mechanism for the ITER Front Steering ECRH Launcher Proposal |
A-26 |
|||
|
|
Ellis |
Fabrication and Design of a High Power Microwave Launcher for KSTAR |
A-27 |
|||
|
|
Mueller |
Design, Installation and Performance of the New Insulator for NSTX CHI Experiments |
A-28 |
|
|
Toribio |
Microscopic Analysis of Hydrogen Degradation in 316L Steel for Fusion Engineering |
A-29 |
|||
|
|
Sa |
Mechanical Characteristics of Austenitic Stainless Steel 316LN Weldments at Cryogenic Temperature |
A-30 |
|||
|
|
Chehtov |
Mechanical Characterization and Modeling of Brazed Joints of Refractory Alloys |
A-31 |
|||
|
(Withdrawn) |
A-32 |
|||||
|
|
Sedano |
Hydrogenic Species Transport Assessments in Ceramic Insulators used in ITER Heating & Current Drive and Diagnostics |
A-33 |
|
|
Kawano |
Effects of Process Conditions on the Partial Pressure Curve of Hydrogen (Including Tritium) |
A-34 |
|||
|
|
Morgan |
Tritium and Helium Effects on Materials for Fusion Technology |
A-35 |
|||
|
|
Korinko |
Permeation Testing of Materials Suitable for Fusion Reactors |
A-36 |
|||
|
|
Klein |
SAES ST 909 Getter Testing at the Savannah River National Laboratory |
A-37 |
|||
|
|
Klein |
Tritium Storage Bed Development at the Savannah River National Laboratory |
A-38 |
|||
|
|
Sessions |
Processing Tritiated Water at the Savannah River Site: A Production-Scale Demonstration of a Palladium Membrane Reactor |
A-39 |