|
|
Pillon |
Characterization of 14 Mev Neutron Detectors Made with Polycrystalline CVD Diamond Films |
A-1 |
|||
|
|
Siegrist |
The Heavy Ion Beam Diagnostic Project for the TCV Tokamak |
A-2 |
|||
|
|
Pujara |
PXI Based Loss Less Continuous Data Acquisition System for Steady State Tokamaks |
A-3 |
|||
|
|
Masuda |
Low-Energetic Metastable Helium Beam Injector for Electric Field Diagnostics by Laser-Induced Fluorescence Method in Inertial Electrostatic Confinement Plasmas |
A-4 |
|||
|
|
Sugito |
Development of Quasi-Optical Technology for Microwave Diagnostics in LHD |
A-5 |
|||
|
|
Cole |
Diagnostic Sightline Optimization for QPS |
A-6 |
|||
|
|
Ellis |
Fabrication and Design of the Lost Alpha Faraday Cup Detector Array for JET |
A-7 |
|||
|
|
Feder |
Optical Design Study of the KSTAR Thomson Scattering Diagnostic |
A-8 |
|||
|
|
Feder |
Mechnical Design of the NSTX High-k Scattering Diagnostic |
A-9 |
|||
|
|
DePasquale |
Spectral Measurement and Archival of NSTX Data Using a High-Speed Digitizer |
A-10 |
|||
|
|
Sichta |
Development of a Universal Networked Timer for NSTX |
A-11 |
|||
|
|
Kung |
Circuit Design to Stabilize the Reflectometer Local Oscillator Signals |
A-12 |
|||
|
|
Beals |
Installation and Operation of New Long Pulse DNB on Alcator C-Mod |
A-13 |
|||
|
|
Burke |
Real Time Control of the Active MHD Diagnostic on Alcator C-Mod |
A-14 |
|||
|
|
Titus |
C-Mod Cryopump Design and Analysis |
A-15 |
|||
|
|
Zaks |
Alcator C-Mod Cryopump Testing and Installation |
A-16 |
|||
|
|
Jernigan |
Massive Gas Injection System for Disruption Mitigation on the DIII-D Tokamak |
A-17 |
|||
|
|
Isayama |
Measurement of Toroidal Structure of Electron Temperature with Electron Cyclotron Emission Diagnostic in JT-60U |
A-18 |
|||
|
|
Matsuura |
Effect of Nuclear Elastic Scattering on Ion Heating in Thermonuclear Plasmas |
A-19 |
|||
|
|
Nakashima |
Surface Temperature Dependence of Hydrogen Balmer and Molybdenum Neutral Lines from the Mo Limiter in Triam-1M |
A-20 |
|||
|
|
Cavinato |
Characterization of the RFX-MOD Saddle Coil System and Design of the Regulator for the Control of MHD Modes |
A-21 |
|||
|
|
Bobeica |
An Experimental Method for Measuring the Response of a Target to the Thermal Environment of the Fusion Reaction Chamber |
A-22 |
|||
|
|
Sadati |
Output Feedback Adaptive Fuzzy Decentralized Control of Cooperative Robots |
A-23 |
|||
|
|
Masters |
Magnetic and Thermal Characterization of an ELM Simulating Plasma (ESP) with Helicon Pre-Ionization |
A-24 |
|||
|
|
Zaccarian |
Advances in the Experimentation of Extremum Seeking Techniques to Maximize the RF Power Absorption in FTU |
A-25 |
|
|
Kimura |
Hydrogen Production from Biomass using Nuclear Fusion Energy |
A-26 |
|||
|
|
Takeuchi |
Numerical Analysis of Endothermic Quantity in Hydrogen Production from Biomass Using Nuclear Thermal Energy |
A-27 |
|
|
Fu Peng |
The Control System of Poloidal Field Power Supply for EAST Superconducting Tokamak |
A-28 |
|||
|
|
Matsukawa |
Synchronous AC/DC Converter Using Advanced Unipolar Power Electronics Devices |
A-29 |
|||
|
|
Ramakrishnan |
Power Supply for NSTX Resistive Wall Mode Coils |
A-30 |
|||
|
|
Coletti |
The Pulsed Power Supply System for Ignitor |
A-31 |
|||
|
|
Lewicki |
Programmable Coil Power Systems for Pegasus Experiment |
A-32 |
|||
|
|
Isobe |
Fusion Power Supplies Using Magnetic Energy Recovery Switch |
A-33 |
|||
|
|
(Withdrawn) |
A-34 |