|
|
Gentile |
Vacuum Pumping System for a Large IFE Target Chamber |
A-1 |
|||
|
|
Ju Chang |
Design and Numerical Stress Analysis of Silicon Membrane Hibachi Windows |
A-2 |
|||
|
|
Reis |
Structural Analysis of the Lower Divertor Plate For DIII-D |
A-3 |
|||
|
|
Madhukar |
Conductor R&D for QPS |
A-4 |
|||
|
|
Bykov |
Strategy of Structural Analysis of W7-X Magnet System |
A-5 |
|||
|
|
Heinemann |
Design of Narrow Support Elements for Non Planar Coils of Wendelstein-7X |
A-6 |
|||
|
|
Williamson |
Challenges in Designing the Modular Coils for the National Compact Stellarator Experiment (NCSX) |
A-7 |
|||
|
|
Fogarty |
Development of Fusion Design Concepts Using Stereolithography |
A-8 |
|||
|
|
Yang |
Recent Progress of the KSTAR Tokamak Assembly |
A-9 |
|||
|
|
Kessel |
Simulation and Analysis of the ITER Hybrid Operating Mode |
A-10 |
|||
|
|
Cucchiaro |
Ignitor Plasma Chamber, First Wall and Remote Handling Maintenance |
A-11 |
|||
|
|
Cucchiaro |
The Ignitor Load Assembly Structural Analysis and Toroidal Field Coil |
A-12 |
|||
|
|
Teodorescu |
Supersonically Rotating Plasmas for Magnetic Fusion: the Maryland Centrifugal Experiment |
A-13 |
|||
|
|
Shrestha |
Study of Dipole-Assisted Inertial Electrostatic Confinement |
A-14 |
|||
|
|
Ogawa |
Simultaneous Neutron and Proton Measurements of D-D and D-3He Fusion Reaction in an Inertial Electrostatic Confinement Fusion Device |
A-15 |
|||
|
|
Takamatsu |
Improvement of Inertial Electrostatic Confinement Device by Magnetron-Discharge-Based Built-in Ion Sources |
A-16 |
|||
|
|
Noborio |
The Potential Profile and its Influence on the Neutron Yield of Inertial Electrostatic Confinement Fusion Device |
A-17 |
|||
|
|
Vysotskii |
The Theory and Realization of Superheavy Nuclei Synthesis in the Process of Controlled Electron-Nuclear Collapse of Condensed Target |
A-18 |
|
|
Anderson |
Mechanical Design and Fabrication of the Lower Divertor for DIII-D |
A-19 |
|||
|
|
Chaudhuri |
Inspection of Brazed Joints Between Cooling Tube and Heat Sink of PFC for SST-1 Tokamak by IR Thermography Technique |
A-20 |
|||
|
|
Yao |
EAST Divertor Design |
A-21 |
|||
|
|
Koehler |
Experimental and Numerical Investigation of Thin Film Dry-Out for Liquid-Protected Divertors |
A-22 |
|||
|
|
Gilliam |
Thermal Desorption of Helium from Tungsten Foils |
A-23 |
|||
|
|
Coventry |
Measurement of Low Energy Sputtering of High Temperature Liquid Tin for Divertor Applications |
A-24 |
|||
|
|
Schultz |
Latest He Pumping Results in the Flowing Lithium Retention Experiment (FLIRE) |
A-25 |
|||
|
|
Kobayashi |
Analysis of Exhaust Gas in JT-60U Tokamak Operation |
A-26 |
|||
|
|
Pathak |
Gas Trapping and Surface Analysis Study of Boron Film Deposited Using Ortho-Carborane |
A-27 |
|||
|
|
Tsai |
Graphite Sublimation Tests for Target Development for the Muon Collider/Neutrino Factory |
A-28 |
|||
|
|
Ulrickson |
Design and Analysis of a First Wall and Shield Module for ITER |
A-29 |
|
|
Paguio |
Development of Foam Targets Used in Inertial Fusion Experiments |
A-30 |
|||
|
|
Wykes |
Assessment of the ITER Dwell Pump-Down |
A-31 |
|||
|
|
Mauzey |
Control Improvements for the DIII-D Cryo System |
A-32 |
|||
|
|
Her |
Development of Welded Bellows for the KSTAR Vacuum Vessel |
A-33 |
|||
|
|
Fukuda |
Vapor Pressure Measurements on Molten Mixtures of LiF, NaF and BeF2 |
A-34 |
|||
|
|
Lascar |
Shock Mitigation Using Compressible Two-Phase Jets for Z-Pinch IFE Reactor Applications |
A-35 |
|||
|
|
Abbott |
Dynamic Response of Thick-Liquid Shielding in Z-Pinch Based Inertial Fusion Energy Chambers |
A-36 |
|||
|
|
Takashima |
Ablation and its Product from the Fast Ignition Inertial Confinement Fusion Reactor Chamber |
A-37 |