4.0f and HSZ70

["swamy c.n.n" <swamy_cnn@xxxxxxxxx>]

Hello Manager's,
 I've AS4100 with 4.0f(bl22 patch) connected to an
HSZ70 (FW:V77Z-2) storage. And, i have 18gb disks on
this. If i add lun's(units) representing individual
disks, on the host side it report's allright, i.e., as
18 gb disks.
Where as, when i try to add stripesets or raidsets, on
the host side, it doesn't report the correct size.
 
For ex: i've create a raidset r0 with 18gb x 6 disks,
which reports around 88gb on the controller. When, i
tried mounting this lun on my host, it shows as some
9gb disk space. Am  i missing someing ??
 
I  reconfigured the storage box, but it was of no
help. Here are some more information on the
configuration :
HSZ> show this full
Controller:
        HSZ70 ZG74002118 Firmware V77Z-2, Hardware 
H01
        Configured for dual-redundancy with ZG80808593
            In dual-redundant configuration
        Device Port SCSI address 7
        Time: 17-MAR-2004 13:30:18
Host port:
        SCSI target(s) (1, 3, 4, 5)
        Preferred target(s) (1, 3)
        TRANSFER_RATE_REQUESTED = 20MHZ
        Host Functionality Mode = A
        Allocation class           0
        Command Console LUN is target 1, lun 1
HSZ> show units
    LUN                                      Uses
--------------------------------------------------------------
  D100                                       R0
HSZ> show r0
Name          Storageset                     Uses     
       Used by
------------------------------------------------------------------------------
R0            raidset                        DISK10000
       D100
                                             DISK20000
                                             DISK30000
                                             DISK40000
                                             DISK50000
                                             DISK60000

Thanks,
Swamy

__________________________________
Do you Yahoo!?
Yahoo! Mail - More reliable, more storage, less spam
http://mail.yahoo.com