multi-lun device visibility question

[George Schlossnagle <george@xxxxxxxxxx>]

Hi,
I'm trying to install a external raid device to a tru64 box.  When I
probe the online devices, I get:

 > sudo hwmgr -show scsi

         SCSI                DEVICE    DEVICE  DRIVER NUM  DEVICE FIRST
  HWID:  DEVICEID HOSTNAME   TYPE      SUBTYPE OWNER  PATH FILE   VALID
PATH
-------------------------------------------------------------------------
    43:  0        crank-s1-2 cdrom     none    0      1    cdrom0
[0/0/0]
    44:  1        crank-s1-2 disk      none    2      1    dsk0
[2/0/0]
    45:  2        crank-s1-2 disk      none    0      2    dsk1
[2/3/0]
    46:  3        crank-s1-2 disk      none    2      8    dsk2
[2/8/0]


However, I only seem to have device entries for the first lun.  I have
8:

scu> show luns

Reported LUN's Supported by Device /dev/rdisk/dsk2a (SR1500):

      Logical Unit Entry #1: 00 00 00 00 00 00 00 00
      Logical Unit Entry #2: 00 01 00 00 00 00 00 00
      Logical Unit Entry #3: 00 02 00 00 00 00 00 00
      Logical Unit Entry #4: 00 03 00 00 00 00 00 00
      Logical Unit Entry #5: 00 04 00 00 00 00 00 00
      Logical Unit Entry #6: 00 05 00 00 00 00 00 00
      Logical Unit Entry #7: 00 06 00 00 00 00 00 00
      Logical Unit Entry #8: 00 07 00 00 00 00 00 00


How do I get devices for the non-zero luns?  The only info I have
found that seems related is a 1996 OSF admins list post suggesting to
use /dev/MAKE_RAID_LUNS, which is not present on my system.

Any help would be greatly appreciated!

// George Schlossnagle
// Principal Consultant
// OmniTI, Inc          http://www.omniti.com
// (c) 240.460.5234   (e) george@omniti.com
// 1024D/1100A5A0  1370 F70A 9365 96C9 2F5E 56C2 B2B9 262F 1100 A5A0