[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

ADDENDUM: cannot boot a GS160: main memory zone is not free



i was told the solution: "type init again" 
but it doesn't work!
if i do, my host is "offline" again from the HSG
i can boot but i can't see HSG disks...



-----Message d'origine-----
De: ROBIN Jean-Marie (EURIWARE S.A.) 
Date: lundi 2 avril 2001 17:23
À: 'tru64-unix-managers@ornl.gov'
Objet: cannot boot a GS160: main memory zone is not free


Hello managers,

I have a GS160 with a KGPSA card connected to a HSG80
under the console SRM prompt, i typed:
"init" 
and 
"wwidmgr -show adapter"
the command returns:
item  adapter           WWN    Cur Topo   Next Topo
[0] pga0.0.0.4.11     2000...   FABRIC     FABRIC
(and on the HSG80 my host is now "On Line")

but when i type "boot"
the command returns immediately with the following message:
warning -- main memory zone is not free

If i use only "init" but without "wwidmgr"
boot is ok but my host is "Offline" from the HSG and i can't see any disk
from the HSG.

Any help would be appreciated!
Thanks





boot and the system came up.
but i can't see the disks from the HSG80.
On the HSG80, "show connection" returns:

ATTENTION  :
Si vous n'êtes pas destinataire de ce message, vous n'êtes pas autorisé à
copier, retransmettre, distribuer, révéler ou conserver le contenu de ce
message.

WARNING  :
If you are not the intended recipient, you are not authorised to copy,
disclose, distribute or retain in this e-mail.

ATTENTION  :
Si vous n'êtes pas destinataire de ce message, vous n'êtes pas autorisé à copier, retransmettre, distribuer, révéler ou conserver le contenu de ce message.

WARNING  :
If you are not the intended recipient, you are not authorised to copy, disclose, distribute or retain in this e-mail.