PARTIAL SUMMARY: Simple raid help needed

[Brian Hostetter <BrianH@xxxxxxxx>]

Thanks to many many people who replied on this one.  I incorrectly stated my card.  It was not a kzpsa, but a kzpsc-ux.  I was able to get the correct software from: 


http://www.asia-pacific.digital.com/windows/Products/download/servertools/SWMgrV42_web/swcc/swcc.htm 

Then I booted to the triple prompt, ran an alphabios, selected the rc200rcu.exe program to run.  I was able to config an old set of drives, but get an error initializing the new set.  They already had a config of 3 mirrored drives on them, but now will not start up.

Is there any way to clear out any configs on a drive cabinet?  I have no need for the data on there and would like to set the cabinet up as one big raid 5 volume

>>> Brian Hostetter <BrianH@xxxxxxxx> 01/04 7:09 PM >>>I am probably going to be laughed at for asking this but I have never done it and can find no examples of how to do it.

I have a Storage Shelf that was installed before I came to this employer configured with 3 drives and 3 mirrors.  I want to just make one big simple volume of of all 6 drives.  I can handle advfs utils and commands so that is not a problem, but what I am wondering is how you configure the actual hardware.  I have updated the firmware on the box and the kzpsa card but am at a loss as to where to go next.  I have downloaded the storage management software, but I cannot connect my windows box to the alpha to do any configs.  

Ideas?  Links to some documenation on how to do this?  Is there a simple util that I can load to help me configure this?

Thanks,
Brian