[Prev][Next][Index][Thread]
DECsystem 5000/50 as Archive
Hi...
Once again.... DECsystem for Archive give an error message.
The message :-
login:
Exception condition
cause reg = 0x2008
exception PC = 0x80125a54
status reg =0x5803
bad virt addr =0x1ffffffc
stack ptr =0xffdac0
system support reg =0x40011fc1
system interrupt reg =0x2000a
system interrupt mask reg =0xf08f8341
cpu 0 panic:trap
routine:0x800aa7d4 called from: 0x801128d0
routine:0x8011244c called from: 0x8012283c
routine:0x80122250 called from:0x80115e64
TRACE ABORTED:Trace confused
locks held by cpu 0
I=8025c9f0, I_type=2, I_hierpos=6d , I_ipl=0
I_wanted=0 , I_pc=80044850
print locks held by non-active processes
dumping to dev 0x1509, offset 81916
partial dump of 1106 pages? IO:3/rz1/1 (bb rd)
can't init console boot device
failed
KN04 V2.1k (PC:0xa00265b8, SP:0xffffd2f0)
>>
>>
>>boot
?IO: 3/rz1/vmunix (bb rd)
>>
>>
I'm using BASYS SYSTEM software for news to run the system.It's not
using all the unix or ultrix command....perhaps you already knew
this.May be you have experience on this.Thanks.
Regards,
..............
(zakaria)