Rishi R Pillai Contact pillairr@ornl.gov | 865.574.4451 All Publications Effect of Impurities on the Compatibility of Steels in Supercritical CO2 at 450°–650°C Leveraging Additive Manufacturing to Fabricate High Temperature Alloys With Co-Designed Mechanical Properties and Environmental Resistance Characterization of Oxide Scales Formed on Fe-20Cr-(20-25)Ni Alloys in Supercritical CO2 Coated and Uncoated Steel Compatibility in Supercritical CO2 at 450°-650°C Revisiting Wagner’s Criteria to Predict Establishment and Retention of Alumina Scales on Ternary NiCrAl Alloys... THE IMPACT OF OXIDATION-INDUCED DEGRADATION ON MATERIALS USED IN HYDROGEN-FIRED MICROTURBINES Differences in Oxidation Behavior of Conventionally Cast and Additively Manufactured Co-Base Alloy MAR-M-509... The Impact of Oxidation-Induced Degradation On Materials Used in Hydrogen-Fired Microturbines Measuring the Dissolution of Cr and Fe at 550°-750°C in FLiNaK and FLiBe The Dissolution of Cr and Fe at 850°C in FLiNaK and FLiBe Methodology for Assessing Stainless Steel Compatibility in Fluoride Salts at 550°-850°C Long term oxidation of NiCoCrAlY coated Ni-based superalloys: A comparison of observed and simulated interdiffusion... Internal carburization and scale formation on austenitic steels in supercritical carbon dioxide Effect of Impurities on the Compatibility of Steels in Supercritical CO2 at 450°-650°C Characterization of Fe and Cr Dissolution and Reaction Product Formation in Molten Chloride Salts With and Without Impurities The Effect of Higher Water Vapor Content in H2-Fired Turbines on High Temperature Durability Revealing the elusive role of water vapor in the oxidation behavior of a Mn-Si containing NiCr alloy at 950 °C Challenges in computationally designing high temperature Fe-based austenitic alloys: Addressing the role of Ni additions Evaluation of Coatings to Improve Steel Compatibility in Supercritical CO2 Establishing a Design Strategy for Corrosion Resistant Structural Materials in Molten Salt Technologies... Cyclic oxidation behavior of selected commercial NiCr-alloys for engine exhaust valves in wet air environment between 800 and... Compatibility of Fe-Cr-Al and Fe-Cr-Al-Mo oxide dispersion strengthened steels with static liquid sodium at 700 ° C... Assessing Stainless Steel Compatibility in Flowing Fluoride Salts... Oxidation Lifetime Modeling of 625 and 120 Foils After Long-term Exposure in Flowing Air + 10% H2O at 700 and 800 ∘C... Defining Temperature Limitations for Steels in sCO2 Applications... Pagination Current page 1 Page 2 Page 3 Next page ›› Last page Last » Key Links ORCID